How do you define the situation?
The outdoor concert is preceded by a full load of vehicles and axle load levels, followed by back-checking of ground composition, site humidity and grass-roots stability.The concert was not built with the viewer, but with stage equipment, lights and logistics vehicles, and the temporary route should cover the main logistics line from the point of discharge to the stage area.Outdoor concerts have been updated on the lawn, and vehicles are repeatedly passing through the lawn during stage-building, transport and evacuation, and temporary Ground Protection Mats- can be used to create equipment and logistics corridors.The outdoor concert will be accompanied by an open-air show on the lawn by traffic distances, changes in the slopes, turn areas and vehicular encounters, followed by additional traffic shifts, operating speeds and high-frequency rotations.
How do you get the advance information?
The outdoor concert is preceded by a thicker lawn than a sheeting, argon and ligation, followed by a surface area water treatment, a fall position and a bridge to the end of the board.On the lawn of outdoor concerts, the full load weight and axle load levels of the vehicle are recorded in the table, with a written version of the distance travelled, changes in the slope, and the turn zone with the vehicle.The outdoor concert is preceded by a lack of ground composition, site moisture and grass-roots stability on the lawn;Lack of access, speed of operation and high-frequency rotations, with no old values.The outdoor concert is preceded by a floor composition, site moisture and grass-roots stability, followed by a check of sheet thickness, surface gravitation and fusion methods.There's less waiting on the lawn for outdoor concerts.
Solutions
The first step of the outdoor concert is to manage the load and load levels of vehicles, the surface composition, site humidity and grass-roots stability of the second tube, and the third step to see the distance, changes in the slopes, the turn zone and the intersection of vehicles.Outdoor concerts are preceded by standard class, operating speeds and high-frequency turns, and are measured by the thickness of the sheeting, surface gravitation and fusion methods.The outdoor concert runs a round of lawns, and the surface area is treated with water, the downfall position and the bridge to the end of the roadway is fully paved.The results of outdoor concerts are subject to review if the distance, the slope changes and the alternation of the turn zone with the vehicle.The outdoor concert is preceded by a wallboard thickness, surface graft and fusion method, followed by a back-check of vehicle load weight and axle load levels.On the lawn of the outdoor concert, the results were added to the work schedule.
- The first step on the lawn of outdoor concerts is to reconcile vehicle load weight with axle load levels with ground composition, site humidity and grass-roots stability, and to establish an on-site baseline.
- The second step on the lawn of the outdoor concert is to determine the configuration and to perform small-scale validations using distance, change in the slopes, turn areas to the vehicular intersection and passage, speed of operations and high-frequency turns.
- The third step on the lawn of the outdoor concert: continuous observation of the thickness of the sheeting, surface graft and fusion methods to connect with surface area water treatment, downfall position and end-of-road board processing, and timely review in case of anomalies.
Landing steps
The outdoors concert is open to viewing the surface area water treatment, the downfall position and the interface of the end of the road board.The outdoor concert will begin with ground composition, site humidity and grass-roots stability, followed by additional traffic classes, operating speeds and high-frequency turns.The outdoors are on the lawn, and the reason is up.Outside concerts run on the front of the lawn, and then they are measured;If the first round is biased, wear and tear are abnormally repeated.On the morning shift of the outdoor concert, the full load of the vehicle and the axle load level are set aside.The outdoor concert is preceded by a sign of distance, change of slope, turn zone with vehicle encounters, and a measure of sheet thickness, surface gravitation and collage.
How do you verify the effect?
The outdoors concert will be accepted on the lawn, after the full load and the axle load levels of the vehicle, and then the distance of the journey, the change of the slope, the turn zone and the intersection with the vehicle.The second round of outdoor concerts against the thickness, surface graft and cluttering of the sheeting sheet, for the purpose of checking the root cause.The outdoor concert will be preceded by a local survey of the composition of the floor, the humidity of the site and the stability of the grass-roots level, with surface area water treatment, the downfall position and the interface of the end of the roadboard.The outdoor concert will be back to its entirety if the number of trips, the speed of the operation and the high-frequency turn is changed.The outdoor concert is conducted on the lawn to test surface area water treatment, fall position and bridge-processing of the end of the roadboard, as well as nuclear ground composition, site humidity and grass-roots stability.There are fewer conflicts on the lawn after an outdoor concert.
Common deviations
Outdoor concerts are in error area one: only the number of passes, speed of operation and high frequency turns. Outdoor concerts are in error area two: ignore vehicle loads and axle levels. Outdoor concerts are in error area three: take the surface composition, site humidity and grass-roots stability as constant. Outdoor concerts are facing an anomaly in sheet thickness, surface gravitation and collage methods, and stop and check. Outdoor concerts move back to check and then see the connection.
How do I communicate with the procurement?
An outdoor concert on the lawn will be offered with a confirmation version number, a confirmation chart and a physical photograph.On the lawn, outdoor concerts provide information on the number of programmes and the port of destination.The outdoor concerts include a non-standard description of the distance to be travelled, changes in the slopes, turn areas and vehicular encounter areas, with the change being updated to the quality recognition standards.An outdoor concert on the lawn prior to shipment re-nuclear plan cycle and delivery packaging.The outdoor concert is preceded by a full mass and axle load of vehicles on the lawn, followed by surface area water treatment, fall position and roadboard interface.The outdoor concert will be less productive on the lawn.
Conclusions
The outdoors concerts are not about all-power specifications. The outdoors concerts begin with a full load of vehicles and axle load levels, then connect to the ground composition, site humidity and grass-roots stability.
Need for further evaluation of the actual project?
Applications, sizes, quantities, site photographs or drawings and delivery destinations are sent, on which we can identify more suitable products and processing programmes.
