Do you also need a leg pad to answer a small core rig? It would be better to observe from a full operating cycle than to look at static photographs. In the case of light corer equipment, which operates on forest land or agricultural land, loading, moving, turning, stopping or lifting changes the stress, the total weight is small but the size of the foot is small, and high pressure may still often occur only in an action. To match the movement to the anomaly, we can find effective improvements.
When establishing the input list, the total weight of the equipment, the maximum reversibility of the subpoints, the height of the mast, the endurance of the ground, the perforation and the conditions of the mud shall be placed in the same table, with an indication of the data source and date. For a small total weight but small foot area, there is a potential for high pressure, and the recommended treatment direction is based on actual feed point reversibility and environmental protection objectives, rather than on the overall weight. A comparison of the specifications, size differences, temperature ranges, connection patterns and test conditions of the pavement and the mats is then made; if the support bases or test methods of the two suppliers differ, the nominal data cannot be arranged in a simple horizontal order.
Figure: Light cored equipment operating on forest or agricultural land
The quality of the installation should be reviewed through photographs and measurements, not just oral confirmation. First to process drainage, pine-dispersion or deform steel plates, then to place pavements and stubs on approved drawings; support systems must be confirmed by qualified personnel in conjunction with the equipment manual. Any need for temporary blocks of wood, random cutting of angles, forced porosity or stacking should be returned to the technicians for re-evaluation.
Maintainers need to know how normal traces of products differ from dangerous injuries. The production of field illustrative maps around sedimentation, horizontality, full-scale exposure to pads and mud spills is more effective than simply writing “watch out”. If the total weight is small but the size of the foot is small, the pressure may continue to increase with the number of times used. The payload, foundation or material should be analysed for excess of the original conditions and a limit, speed limit or suspension measure should be taken until confirmed.
For temporary roads, the number of crashes, the length of blockages and surface repairs can be used as indicators; for leg support, the logs are evened and down; for carriage liners, the residue rate, lifting time and steel plate maintenance are tracked. Select two to four matches to this topic. As long as the caliber is fixed, the total weight is small but the size of the foot is small, changes that may still produce high pressure can be objectively identified.
The ultimate goal is not simply to install a product, but to keep light cored equipment operating on forest or agricultural land at acceptable risk. Approval of the programme should be accompanied by the use of restrictions, inspection responsibilities, decommissioning criteria and evacuation methods. This may result in a high pressure even if there are changes in personnel or shifts that do not re-inducing a small but small total weight due to a lack of information.
Need for further evaluation of the actual project?
Applications, sizes, quantities, site photographs or drawings and delivery destinations are sent, on which we can identify more suitable products and processing programmes.
