When discussing how to protect the environment from the movie scenes, a distinction should be made between surfaces, equipment support and personnel access. Photographic vehicles, light vehicles entering parks or historical sites may contain three requirements at the same time, and repeated movements can create a trail and widen the disturbance range, which can be magnified by overloading traffic. The division of the site into different functional areas is the first step in determining the product, thickness, width and quantity.
Four cores can be used for “site-equipment-product-operated”: the site and equipment column records the number of exhibitors, the weight of the equipment, the logistics time window, the viewer flow line, the type of surface and cleaning standards, the product column specifies the size and connection, the operating column contains a single access line, a stop point and a evacuation site restoration. Any one still relies on speculation, which may lead to the re-emergence of repeated movements at the peak of activity, as well as the expansion of disturbances.
Figure: Photography vehicles, light vehicles entering parks or historical sites
The construction organization is as important as the product specifications. Operators shall use means of transport suitable for a single mass, and the vehicle shall be directed by a commander and shall not be braked, wheeled or pressed. The exhibition's ground protection is to separate the construction logistics from the open-ended population. Prior to the opening of public areas, access transitions, trip risks and fence segregation are also checked.
Special inspections are added in case of severe weather or equipment anomalies. Use of fixed angle photographs and position markings for loading and unloading areas, forklift bends, plates, contamination and viewer passages to facilitate comparison of deposition and positional movement. It is prohibited to clean the surface of a polymer with fire, violence or sharp instruments to avoid new damage.
The receiving and inspection information shall be maintained in the form of a map, product number, photographs of the entry and exit site, initial status and an abnormal work list. In the event of a lawn or road dispute at the end of the activity, the information may distinguish between the original problem, the change in use and the fallout.
The conclusions can be summarized as the first confirmation of the boundary, then the layout of the pavement, followed by the inspection and validation of the project data. Formal programmes should also identify the use of restrictions, duty-bearers, decommissioning criteria and evacuation methods to avoid the loss of information as a result of shifts or changes in contractors.
Need for further evaluation of the actual project?
Applications, sizes, quantities, site photographs or drawings and delivery destinations are sent, on which we can identify more suitable products and processing programmes.
