The mobile stage and small lifting equipment, which spreads legs on the lawn, appears to require only one road, which is actually related to drainage, vehicle movement, site protection and evacuation plans. Answering the question whether the moving stage legs can be placed directly on the lawn, the small foot should be positioned and photographed in situ with high pressure and possibly uneven deposition, and the frequency, impact and permitted recovery time should be confirmed.
The key to this topic is not to choose the thickest, but to establish a match. Identification and control of the condition based on the maximum axle load of the vehicle, tyres, turn radius, handling rhythm, grassland water content and night lighting, and the selection of the right leg pads by the maximum leg reaction and ground-based bearing, with the right pavement and the right leg pads. If products need to be moved more frequently, manual weights, posts, stacking and cleaning should also be added to the total cost.
Figure: Mobile stage and small lifting equipment spreading legs on the lawn
The construction organization is as important as the product specifications. Operators shall use means of transport suitable for a single mass, and the vehicle shall be directed by a commander and shall not be braked, wheeled or pressed. The concert's roads must be accompanied by heavy transport, isolation and emergency passage. Prior to the opening of public areas, access transitions, trip risks and fence segregation are also checked.
The inspection cycle should be shortened at the beginning of the operation and the product should be stabilized and adjusted for risk. Focus on the seams, edges, turn areas, loading points and viewer junctions, as well as the driver ' s compliance with speed limits and turnover requirements. Loose connectors, deep mouths, abnormal arctic arctics, or strip shifts should be immediately photographed and closed.
The full life cycle costs include procurement or lease, transportation, laying, inspection, cleaning, maintenance, warehousing and site restoration. Once the data are built around small feet that generate high pressure and may be uneven downfall, the project will be able to determine whether the selection of a suitable leg cushion by the maximum leg reaction and ground-based load actually reduces the combined costs.
The security floor must not be reduced by the tight opening or evacuation time. In the event of a small foot producing a high pressure and possibly uneven deposition, the cause is isolated and identified before a decision is taken to repair or reroute. Any improvement must avoid introducing new risks of slide, trip, overload or human conflict.
Need for further evaluation of the actual project?
Applications, sizes, quantities, site photographs or drawings and delivery destinations are sent, on which we can identify more suitable products and processing programmes.
