Pumping vehicles, high-altitude operating platforms, cranes and mobile cranes may all use legs, but they have different retrogressive legs, toler shapes, operational actions and risk classes, so that “sizing down” does not mean that they can be shared directly. The same pad is possible to be included in a generic inventory only if the equipment requirements are met by the maximum design reaction, required pressure area, local pressure, thickness, ambient temperature and product state. Any equipment shall be based on its own manufacturer information and operational plan.
The concrete pump will alter the stress of the legs as they move and rotate in the arm of the cloth, and may also have a periodic effect as a result of the pump delivery during the construction process; the high-altitude operating platform, although of a lower total weight, is smaller on the foot plate, with a higher population and is more sensitive to small tilts; and the suspension radius and direction of the crane and crane are clearly affected. The leasing company should collect the maximum reversibility of the leg, the size of the tollboard and the permitted tilt of each type of machine, rather than simply distributing the pads by the name of the equipment.
Web site mapping: cranes and leg mattress applications
When a generic programme is established, the equipment can be divided into several levels by reaction and torque size, and each level can be configured with a certified plate size and quantity. Long-term numbers, rated scope of application or colour codes are used on the pads, and the warehouse records the results of each dispatch, recovery, cleaning and inspection. The handle position should be suitable for physical handling, and the plate should not have deep troughs that would destabilize the small toy; sufficient distance should be left between the edge of the toy and the pad, using the accompanying bridge sheet if necessary.
The greatest risk of sharing is that the product has been cracking, deep mouth, permanent bending or chemically contaminated in the previous project, but is sent directly to the next equipment without inspection. On each return to the vault, two sides should be cleaned, the edges, the central areas under pressure, the handles and markings should be checked, and products that exceed the criteria for conviction should be immediately isolated. Different temperatures and chemical environments may also change applicability, such as winter temperatures, oil pollution or solvent exposure requiring separate identification material.
As a result, sharing can reduce the complexity of the lease inventory, provided that the applicable matrix is built with data and not simply replaced with experience. More rational recommendations for serialization can be obtained by providing suppliers with lists of equipment, maximum retrogressive force of legs of each aircraft type, surface range, ton size and ceilings for manual handling. Ground and operational conditions should still be confirmed on site; general-purpose pads should not exempt different equipment from their supporting computing and operating protocols.
Need for further evaluation of the actual project?
Applications, sizes, quantities, site photographs or drawings and delivery destinations are sent, on which we can identify more suitable products and processing programmes.
